DRY RISER LANDING / GATE VALVE

Horizontal valve to BS5041 (Part 2)with Flanged inlet and 2 1/2” Instantaneous female single twist outlet. Inlet flanged to 2 1/2” or 3” BS10 Table D or 65mmBS4504 NP16 or 2 1/2” Female BSP.

Other inlet options available upon request.

Supplied unpainted as standard. Red Paint finish available upon request Female outlet supplied with plastic blank plug and chain.

Padlock and strap to handwheel available as optional extra.

Material: Gun Metal Body. Cast Iron Handwheel

GLOBE PATTERN VALVES

Screw down valves suitable for wet rising mains and offshore applications.

Four Configurations: Horizontal, Bib-nosed, Oblique and Right Angle.

Standard valves are supplied with 2 1/2” Female Instantaneous single twist outlet to BS336. Alternatives available upon request.

Supplied unpainted as standard. Red Painted finish available upon request.

Standard Inlet flange 2 1/2” BS10 Table D or 65mm BS4504 NP16 - others available upon request.

Material: Gun Metal

Blanking plugs supplied as optional extra, either plastic, rubber or gun metal

DRY RISER INLET BREECHING

Manufactured to a universal pattern BS5041 Part 3 with the option of a horizontal or Vertical configuration.

A two way breeching is suitable for connection to a 4” Rising Main whereas a larger 4 way inlet breeching is more suited to a 6” Rising main. A smaller version is available with a one way inlet on request.

Inlets 2 x 2 1/2” Male Instantaneous to BS336 c/w non-return
valves and rubber blank caps and chains

Outlet Flanged 4” BS10 Table D

Fitted with 1” Drain Valve to BS5154 with blank cap and chain as standard.

Material: Cast iron Body, Gun Metal Instantaneous inlets