PLAIN JET BRANCHPIPES & NOZZLES

Plain jet nozzles can be supplied as one piece ‘combined’
units or as a two part Branchpipe with separate nozzle.
Nozzle outlet sizes can vary in size from 9mm, 12mm,
16mm, 19mm and 25mm.

Material: Light Alloy or Gun Metal.

Standard inlet Male 64mm Instantaneous to BS336. 38mm
(Feta approved) can be supplied as an alternative. The
nozzle is connected to the branchpipe with a 1 3/4” BSP
Thread and is tightened with the nozzle spanner.

The seperating washer can be supplied as a spare part.

PLASTIC BRANCHPIPES

As with the previously illustrated combined branchpipe
and nozzle the plastic version is only offered as a one
piece unit. Each unit is offered with a light alloy or Gun
Metal reinforcing tip to the male instantaneous inlet as
standard.

The colour of the branchpipe indicates its outlet size.

Green 5/8th
Blue 1/2”
Yellow 3/4”
Red 1”

DIFFUSER NOZZLES

The diffuser Branchpipe is a twist operated unit which can be supplied as a ‘short’ pattern version that has an integral 64mm instantaneous male inlet or it can be supplied with a threaded inlet for connection onto a basic branchpipe.

Control of the nozzle is made by gripping the rubber ring and turning through shut off through jet and spray to wide angle curtain.

The rubber ring also provides protection from impact damage if dropped.

Materials: Gun Metal or Light Alloy.